Effetto Mariposa Giustaforza II 2-16Nm Torque Wrench - Black
Average connection time 25 secs
Average connection time 25 secs
The home-mechanic’s dream tool, the Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The DELUXE version is completed with cycling-specific bits and comes into a practical wrap package.
Capacity from 2 up to 16 Nm:
This is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.
Easy to use:
- Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other). Insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.
- Minimal fixed head:
- Giustaforza’s simple, ‘non-ratcheting’ head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.
Giustaforza II 2-16
Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.
A state-of-the art tool, built to last:
Functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
The +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service Effetto offer in their laboratories at the cost of 35€ plus shipping expenses. After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will be returned to the customer with a calibration certificate.
Please Note: The DELUXE version is completed with cycling-specific bits and comes into a practical wrap package.v
도착하기까지 얼마나 걸리나요?
주문할 때 재고 가능 통지를 확인하세요. 이 아이템은:
배송됐는지 어떻게 알 수 있나요?
아이템이 배송된 후에 확인 메일이 갈 것입니다.
주문 상황과 개별 상품을 확인 할 수 있습니다 나의 계정 세부사항과 다음의 프롬프트.
늦는 배송을 저희에게 알리시기 전에 배송으로부터 영업일로 10일은 소요될 수 있음을 알아주십시오.
당신의 이웃들이 대신 수령했는지, 우편함에 들어가지 않아 집 밖의 다른 곳에 둔건 아닌지 확인하고 지역 분류 오피스에 상품이 배송되지 않고 대기하고 있는 창고로 반환되었는지 연락하시기 바랍니다.
제품에 만족하지 못한다면?
현재 리뷰가 없습니다.
리뷰를 남기고 프로바이크킷 사이트 내에서 쓸 수 있는 100파운드 바우처에 당첨되세요!
다른 고객분들께서 함께 구매한 제품
EFFETTO MARIPOSA GIUSTAFORZA II 2-16 PRO DELUXE 토크렌치 - 레드 (드릴날 포함)기존금액 ₩311,220₩212,320할인금액 ₩98,900