Live Chat
Average connection time 25 secs
Average connection time 25 secs
MOOSE is a simple, light and reliable 2 arms bike carrier that fits any 50mm tow ball. Good design, good quality to safely transport up to 3 bicycles.
- Cradles and rubber straps help position and secure the bikes.
- Arms can easily fold when not in use.
- Complete rack tilts down for boot access.
- Strong, easy to use locking system to fit any ISO 50mm tow ball.
- These carriers are supplied ready to go; no assembly work is required.
- The patented conical tow ball clamp fits onto all 50mm diameter tow balls, even the ones which don't meet BS standards with e.g. rough casting around the tow ball neck.
- Fitting is a matter of spinning a hand-turning wheel, a really quick, easy and ergonomically satisfactory thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Additional tensioning of a Nyloc nut is sometimes required (spanner supplied), depending on the tow ball, to make sure the carrier is firm.
- It's fine engineering, and strong - the Moose has been TÜV approved to the proposed ISO standard R18-904-4, a standard some way tougher than current requirements.
- Tilting is a safe single-handed operation, even with the bikes fitted. The Moose 3 tilts to allow access to the boot on most cars. If you have a van or an MPV with a vertical tailgate, and you want to be able to access the boot with the bikes loaded, we recommend the Atera STRADA DL3.
- The bike frame holders need to be adjusted on the support arms first time out - distances between bikes may vary - before being tightened in place (tool supplied). They have properly padded cradles and easily adjusted rubber straps.
- The support arms are 28cm apart, centre to centre, a distance which will suit the majority of modern frames.
- Two top quality 200cm safety straps are also provided (buckles sewn not crimped). One of these should be threaded through all the bike wheels to prevent swaying and friction damage - it's up to you to provide any extra protection required - and the other should be passed through all the bike frames and then looped around the carrier.
- The bike holder arms should be moved from the horizontal to the vertical for storage, or when the vehicle is parked up.
- Dimensions: 84.5cm high from the centre of the ball and 55.0cm deep from ball centre.
- Weight: 8.5kg.
- Max load capacity: 45kg
- 로드
- MTB
- Buzz Rack
도착하기까지 얼마나 걸리나요?
주문할 때 재고 가능 통지를 확인하세요. 이 아이템은:
배송됐는지 어떻게 알 수 있나요?
아이템이 배송된 후에 확인 메일이 갈 것입니다.
주문 상황과 개별 상품을 확인 할 수 있습니다 나의 계정 세부사항과 다음의 프롬프트.
늦는 배송을 저희에게 알리시기 전에 배송으로부터 영업일로 10일은 소요될 수 있음을 알아주십시오.
당신의 이웃들이 대신 수령했는지, 우편함에 들어가지 않아 집 밖의 다른 곳에 둔건 아닌지 확인하고 지역 분류 오피스에 상품이 배송되지 않고 대기하고 있는 창고로 반환되었는지 연락하시기 바랍니다.
제품에 만족하지 못한다면?
현재 리뷰가 없습니다.
리뷰를 남기고 프로바이크킷 사이트 내에서 쓸 수 있는 100파운드 바우처에 당첨되세요!